Low maintenance cost and fast payback time: State-of-the-art hydraulics with the best efficiency among competitors, together with an IE3 class engine, make this pump series optimal for solving your problems
Long service life: Stainless steel metal housing and high quality bearings guarantee a long service life.
Low Noise Level: High efficiency hydraulics, advanced motor and thick stainless steel plate pump housing ensure low noise level.
e-HM for Residential Buildings: A reliable water supply solution for most buildings, from cottages to 10-story apartment buildings.
The new e-HM series is available in several versions:
e-HM for industry: suitable for all applications, including water treatment and food applications: - AISI 304 or 316 stainless steel - Electropolished - Compact and high performance versions - Various mechanical seal material options
The Lowara e-MP series pumps are extremely rugged and reliable and are suitable for use in almost any high pressure system.
Combining innovative developments and many years of experience of Xylem, they are a multifunctional and effective solution for tasks in the field of industry, utilities, utilities and agriculture.
Thus, thanks to its versatile design, the e-MP series can be used in almost any application.
Execution options:
Multifunctional, highly reliable and high-tech pump capable of satisfying the needs of a wide variety of consumers.
Various design modifications with different nominal performance are available
1-3-5-10-15-22-33-46-66-92-125 m³/h
easy dismantling of the outer jacket due to the special design of the sealing ring seat
floating structure for self-centering of the wear ring (glass-filled PPS technopolymer, resistant to chemically and mechanically aggressive liquids and high temperatures)
low axial pressure of the impeller, providing an increase in the life of the bearings of a standard engine (17,500 hours)
Intermediate bushing bearing made of durable material (tungsten carbide/silicon carbide) for longer life and greater durability in heavy duty applications such as boiler feeding
on request versions with seals resistant to high temperatures (up to 180°C) are available modifications with low NPSH modifications designed for high pressure (up to 40 bar) and modifications with passivated and electropolished surfaces
Vertical multistage pumps with submersible hydraulic part.
Standard vertical installation; horizontal installation on request.
These pumps can handle clean liquids without abrasives or fibers with kinematic viscosities up to 37 mm2/s, with a suitable motor size.
Minimum liquid suction level: - 25 mm for models SVI 2-4-8-16 and - 80 mm for SVI 33-46-66-92.
Suction side base with filter to avoid damage due to ingress of solids.
Application
The new VM series are multistage pumps with a modern and reliable design that are designed to work in water supply systems of both private and multi-family buildings: Modern and best-in-class hydraulics, together with IE3 class motors, allow you to have the lowest operating costs.
Stainless steel housing and high quality bearings guarantee a long service life.
High-efficiency hydraulics and engine ensure minimum noise levels. One-piece design and threaded connections for a compact installation.
The new pumps of the VM series are available in different versions:
Application
Type P, PA, MP 300: Horizontal design with thru-shaft supported on both sides by bearings; drive end on pressure side (standard), clockwise rotation; the suction pipe is directed to the left, the pressure pipe - radially upwards; lubricant is liquid. Counter-clockwise rotation and other flange positions are available as options.
Type PVa: Vertical design with separate thrust bearing and flexible coupling connecting motor and pump shafts. Standard IEC motors up to 315 kW.
Type PT : Vertical design with extended shaft for wet mines. Max installation length: Max. 10 m - 1450 / 1750 rpm Available with inductor
Application
Self-priming monobloc pumps with built-in ejector system, designed to ensure proper suction even in the presence of dissolved gases in the water.
The use of stamped stainless steel guarantees high performance and reliability of the pump throughout its entire service life.
Suitable for pumping drinking water. A "garden" version is available with a comfortable handle and terminal box with built-in switch.
Application
A wide range of stainless steel horizontal pumps for domestic and industrial applications.
Models are available with one (CEA) and two impellers (CA).
Also available are "V" versions with FPM ( Viton ) seals for pumping liquids up to 110°C and "N" version made entirely of AISI 316 stainless steel.
Application
These pumps combine the advantages of open impeller pumps with the advantages of AISI 316 stainless steel construction, which is well suited for handling moderately aggressive liquids even with suspended solids up to 20mm.
Application
The new series of Lowara e-SH pumps are AISI 316 stainless steel cantilever single-stage pumps designed for pumping water and aggressive liquids.
They are suitable for a wide range of applications where it is necessary to use pumps resistant to aggressive media.
High efficiency and low costs
New high-performance hydraulics with an MEI value above the level of the European directive ErP2015 and IE3 class motors ensure low operating costs. When using the control module with a Hydrovar frequency converter, you can always achieve the required parameters. It must be remembered that by reducing the speed by 50%, we reduce power consumption by 85%.
The pump body and impeller are made of AISI 316 stainless steel. Using different types of mechanical seals and different motor options, e-SH pumps are suitable for pumping more than 1000 different liquids.
Application
AISI 316 stainless steel SH series pumps are designed for pumping hot, cold and moderately aggressive liquids.
Possible versions
Application
Peripheral impeller pumps can develop high heads with relatively small motor powers.
Possible executions
Application
Monobloc, self-priming pumps with side channel and star-shaped impeller.
Designed for stable suction of liquids containing dissolved gases or where the inlet line is not filled with liquid.
Nickel-plated brass impeller prevents possible blockage due to oxidation.
Application
Horizontal single-stage volute casing pumps according to EN 733
Horizontal single-stage axial suction pumps with closed impeller and oil lubricated bearings.
Made according to a scheme that provides simple maintenance (rear parsing system).
Removal of the impeller and bearing support is possible without dismantling the pump casing and electric motor (coupling spacer required).
The inlet pipe is axial, the discharge pipe is vertical (optionally horizontal).
The drive is carried out by an electric motor through a flexible coupling mounted with a pump on a common base frame.
Monobloc axial suction single stage pumps, ISO 2858 hydraulics, directly mounted IEC motor, designs B5
Horizontal single-stage volute casing pumps designed in accordance with international standards ISO 2858 /EN 22858 and ISO 5199/EN 25199
With high efficiency, ease of installation, a variety of materials and a wide temperature range, the new Lowara e-NSC pump series is the best solution for plumbing, heating and air conditioning, fire protection systems and various industrial applications.
New high-performance hydraulics that comply with European energy efficiency standards ErP2015 and IE3 motors allow for low operating costs.
Robust housing, various bearing frame options and stainless steel wear rings guarantee a long service life. The e-NSC series provides ease of installation and maintenance to reduce downtime. Available body materials from cast iron to duplex steel and a variety of mechanical seal options make the e-NSC series suitable for pumping over 1,000 different liquids.